close
close

How To Light Pilot Light On Ventless Gas Fireplace

How To Light Pilot Light On Ventless Gas Fireplace. Push the igniter button once every second until it lights. The normal color your pilot light should.

How To Turn On Gas Fireplace With Floor Key
How To Turn On Gas Fireplace With Floor Key from c.oldnbajerseys.com

After the pilot lights, keep the. Locate the gas turn on knob near the back of the fireplace and turn the knob to the 'on' position. When the fireplace or propane heater is turned on, the pilot light serves as an ignition source for the larger sweep of gas released from the burner.

The Pilot Lights, But Not Staying Lit,.

First, turn your gas fireplace’s knob from the “off” to the “pilot” position. If the pilot light still won’t stay lit, call the manufacturer or replace the thermocouple. Push the igniter button once every second until it lights.

Natural Gas Is $0.60 A Day = $219 A Year.

Our own gas fireplace insert is an older model and the pilot light is the standing flame type rather than the intermittent pilot ignition found often found. Pilot light systems are the most common reason gas fireplaces fail to light, so check the main gas valve to make sure the gas is turned on. You turn the control knob to the pilot position, push the knob in, light the pilot with a match, then hold the knob down for 30 seconds or so until the pilot stays lit by itself.

Depending On How Long It’s Been Since The Gas Fireplace Was Last Used, Ignition May Take Several Attempts Before Igniting.

Reset the knob to the pilot position: This continuous flame is necessary to light large burners such as those found in gas fireplaces. How much does it cost to run a pilot light on a gas fireplace?

When You Are In The Off (Full Clockwise) Position, Rotate Clockwise (Approximately 1/8 Turn) To The Position Of The Pilot And Then Push On The Control Knob Completely Into.

With that said, you can always light a gas fireplace by holding the pilot light down and lighting a match. Push in the pilot knob, which will then manually send gas into the system. How to light the pilot on a monessen gas fireplace.

To Light Gas Logs Safely, Turn The Control Handle To The Pilot Position, Press It In, Light The Pilot With A Match And Hold Down The Handle For Half A Minute Until The Pilots Are Burning On Their Own.

Locate the gas turn on knob near the back of the fireplace and turn the knob to the 'on' position. When the fireplace or propane heater is turned on, the pilot light serves as an ignition source for the larger sweep of gas released from the burner. A pilot light is a small flame that is kept alight using a steady, small stream of gas.

Leave Comment

Your email address will not be published.