How To Reset Maintenance Light On Toyota Rav4 2017. W/ engine start/stop button keep your foot off brake pedal and push engine start/stop button twice to get key on/ engine off mode. In order to reset the oil life indicator on your 2017 toyota rav4 you'll first need to start the engine and press the disp or trip button until your panel says trip a.
Quickly push and hold the odometer button on your dashboard, then turn your key to position two. Turn the key back to “ lock “, then release the “ disp ” or trip meter button. Push and hold the trip meter reset button on the dashboard.
Please Follow The Instructions Below According To Your Vehicle Trim Level.
Press and hold odo trip button/disp button and turn ignition to the “run” position. Some models don’t have the. Continue to hold the “ disp ” or trip meter button and turn the ignition back to the “ off ” position.
Once You Have Turned The Key Back Off, Make Sure That You Press The Trip Meter Reset Button To Reset The Maintenance Required Light.
Contact your toyota dealer to check your vehicle’s emission control system and obd (on−board diagnostics) system before taking your vehicle for the inspection. For some models, this is the button used to switch from the odometer reading to the other two trip meters. There are 2 methods to reset the maintenance reminder on the toyota rav4.
Push And Hold The Trip Meter Reset Button On The Dashboard.
How do you reset the maintenance light on a 2017 rav4? Put the yellow electrical connector back in place and close the panel cover. W/ engine start/stop button keep your foot off brake pedal and push engine start/stop button twice to get key on/ engine off mode.
Turn The Ignition To Run (One Position Before Starting Engine).
The flashing dashboard light will go off and the reading on the odometer will reset. If the light is still on, repeat this process once or twice to turn off the maintenance light on the toyota rav4. If you notice the light is still on, repeat this process ohow to reset maintenance light on toyota rav4 one or two more times.
How To Reset The Airbag Light On A Toyota.
Hold this button for a while. Look for a yellow electrical connector. Once there you can move the ignition in to the lock position but do not run the motor.